h1

7.4 Home Sewing Front – Spectra Quilt

July 18, 2010

So I started playing around with EQ7 this morning.  I have successfully read through the entire user’s manual (at Jiffy Lube, during lunch breaks, falling asleep). 

I wasn’t at the computer while reading, but I at least have heard of the terms used in the program a little bit at this point.

I thought I had a good handle on how to navigate EQ7, and considering my experience in photoshop, thought that the whole thing would be a piece of cake to navigate.

Well, it’s OK, and I don’t know if it’s just my lack of experience or what, but I have been taking longer than expected to handle the navigation of the program.

You put everything you want to do in your sketchbook before you use it.  And then you have to color everything.  I haven’t even figured out how to color a block and then put it into a quilt that way – all i’ve used on colors is preset color choices and then changing them to colors I want.  But what if I chose to keep some blocks different colors (or the same) than what the presets? 

I did a drawing with freedraw (or some name I don’t remember) and used Serendipity to make it kaleidoscope, but then I couldn’t put my new kaleidoscoped block into another block. 

I suppose if I export the block I may have the control I want, but the program said that it couldn’t do what I wanted to at the time.

And I didn’t notice that the coin quilt block was there, and I was having a hard time with making my spectra quilt until I just imported each spectra as a photo. 

 

I didn’t know how to make a coin quilt from the start because that option wasn’t a preset (although I have been told there are coin quilt blocks available, I haven’t done that yet).  The way I set up my spectrum quilt to get this picture is:

  • Vertical Strip Quilt
  • 1st Block 4.5 inches
  • 2nd Block 1.5 inches
  • 3rd Block 4.5 inches
  • with a 1.5 inch border

This size may make a nice table runner, my overall size is 19.5 X 34 inches which fits the space I have wonderfully.  I didn’t have a sashing option by doing a vertical strip quilt style, and since this is based on a photograph this was overcome by making the sashing strips the size of my inner ‘blocks’.

I was hoping for some more help in figuring out exactly how wide each spectra would have to be, but I did the math and a little Dimensional Analysis (yes science, math and chemistry practice has come in handy here!) and played around with my quilt size to make the math easier and I have a lovely start on my spectra quilt – USING PHOTOSHOP. 

Sorry folks, but I had to go back to my old standby when I kept trying to zoom in farther and farther on my picture within the completed quilt and couldn’t get the thing to do what I wanted it to do.

 Having 10 years of playtime on photoshop probably made it easier to figure out how to get the program to behave better than a program I’ve had for a month and a half which I haven’t taken computer time to decipher yet.

To get the size of each bias bar accurately (which I am not doing by the way), I had to do the following photoshop steps:

  1. Set a grid up.  The grid is modified in Edit/Preferences/Guides,Grids&Slices.  I set up grids every 4 subdivisions every 4 pixels.  Using dots.
  2. Zoom in on my original picture far enough. 
  3. Pick some crazy colors 
  4. Set up the paintbrush tool to 1.0 pixel in size
  5. Each ‘dotted box’ I put a colored dot just along the side of the picture.
  6. Each 1 dot was green, every 5 dots was red.  Very tedious steps (5&6)
  7. Then I changed to a different color (blue) and every 2 red dots put a dot to the right (every 10 pixels)
  8. New color, every 20 pixels (two blue dots) put a dot (purple)
  9. New color, every 50 pixels (two and a half purple dots) put a dot (yellow).
  10. This made it easy to count the total number of pixels in each row, and gave me a fairly accurate idea of where in each row the colored lines were. 
  11. I had a total of 310 dots, so I made the length of the quilt 31 inches so that each inch would be 10 dots. 
  12. I really should go metric with the calculations from here, but no one sews a metric seam allowance.  If you feel the urge, I know that 2.54 centimeters = 1 inch, so you can do some more dimensional analysis to figure it out if you so choose.
  13. I put all these dots on a new layer in photoshop so I can move the layer around to each of the strips and ‘count’ where the lines are. 
  14. The strips are all about 1/10 or 1/5 of an inch finished, but I don’t have any bias tape makers that go that far, so I’ll have to get out my bias bars and use the thinnest one available. 
  15. I’ll approximate on the color values used for each color and perhaps vary the brightness at this point

This makes me happy that at least I am thinking about this project – AND I am using math – AND I am using dimensional analysis – something for which both chemistry and physics heavily prepared me.

But today, a sewing day, I worked more on my black and white quilt.  Black and white borders complete, sewed onto the quilt (measured heavily because of how I had to strip the setting trapeziods) and started on my ‘handdrawn celtic border corners’.  12 total.  1 down, 11 to go.

This, in no way, is a negative review of EQ7.  I haven’t discovered the possibilities yet on this. 

But it is a reflection that I need to use the things I can do with EQ7 and the things I can do with photoshop and put the talents together while I learn and play with the possibilities (and limitations) of both programs. 

I know people would like a podcast/review on EQ7, and I have to wait to know what is going on before doing so, but when I get to it, I’ll see if I can cook up something. 

It felt very nice to not only be creative today in the computer programs, but also very comfortable to be doing the math that I’ve been avoiding unnecessarily.  Incredible how odd that feels to say, but so very true.

5 comments

  1. Thanks for your comment on my genome quilt layout. The squares are pinned onto a sheet, which is nailed to the wall, so fingers crossed that it’ll be fine! (Which is a good job as I’m really busy at the moment, and don’t know how much time i’ll have for sewing it together!)


  2. I used Corel draw before EQ5, and had similar experiences trying to use a quilt program rather than a drawing program. Six months later I deleted the drawing program because it was taking up space on a computer with small brain! With new computer never even considered loading it back up again.

    Play with EQ, and think like a quilter while you are doing it, and draw some basic quilts first!

    Judy B


    • Judy, I’m going to need a lot of patience and persistance. This program isn’t as intitive as I had hoped. I tried making 2 different blocks for a quilt pattern last night and when I hit new block, even though the old one I saved to the sketchbook, only the new one appeared. Maybe instead of hitting new block, I am hitting new project instead.


  3. Here is an online program that converts photos to cross stitch patterns. You can use about any kind of jpeg file and it will work. Fun to work with!

    http://www.myphotostitch.com/



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: